Axial Fan Demonstration Unit
Categories: Technical Educational Equipment
Product Code: AEFM059
About this product
Axial Fan Demonstration Unit
It is a bench top unit having a small scale axial fan and all other required connected equipment. It performs the axial fan’s impeller and measuring devices to be clearly observed. An orifice plate is attached in the ducting for the measurements of air flow rates, which can vary through an aperture control device. The unit can be connected to a PC for convenient data logging and recording of experimental data.Specification:
- A small-scale axial fan demonstration unit, comprising of an inlet duct, the fan, an outlet duct and an adjustable aperture, all mounted on a stainless steel base.
- Equipped with electronic measurement sensors for fan head pressure, flow-rate (via orifice plate), fan speed and air temperature.
- Transparent ducts give visibility of the fan in operation.
- Capable of being linked to a PC (not supplied) via a dedicated interface console (an essential accessory).
- Supplied with software providing full instructions for setting up, operating, calibrating and performing the teaching exercises. Facilities for logging, processing and displaying data graphically.
- Full theoretical back-up together with a student questions and answers session.
Capabilities:
- A small-scale axial fan demonstration unit, comprising of an inlet duct, the fan, an outlet duct and an adjustable aperture, all mounted on a stainless steel base.
- Equipped with electronic measurement sensors for fan head pressure, flow-rate (via orifice plate), fan speed and air temperature.
- Transparent ducts give visibility of the fan in operation.
- Capable of being linked to a PC (not supplied) via a dedicated interface console (an essential accessory).
- Supplied with software providing full instructions for setting up, operating, calibrating and performing the teaching exercises. Facilities for logging, processing and displaying data graphically.
- Full theoretical back-up together with a student questions and answers session.
Technical Specification:
- Max Flow Rate: 38 l/s typical
- Max Head: 0.06 KPa
- Max fan speed 2700rpm
- Motor Power rating 5W
Related Products
Reynold’s Apparatus
Description: The apparatus consists of a glass tube with one end having bell mouth entran...
Losses in Pipes Friction Apparatus
Description: The setup consists of 2 pipes of different diameters, which are connected in...
Losses in Pipe fitting Apparatus
Description: The set up consists of a ½” bend and elbow, a sudden expansion & sudden...
Flow Over Notches Apparatus
Description: The setup consists of a channel having sufficient length and width in which...
Bernoulli’s Theorem Apparatus
Description: The equipment is designed and fabricated to demonstrate the Bernoulli's theo...
Hydrostatics Bench Inclusive Of Constant Head Inlet Tank, Variable Outlet Tank, Feed Block And Manometer Board
The Bench enables the student to appreciate the fundamental concepts of Hydrostatics and P...
Series And Parallel Pump Test Set Comprising Wattmeters And Flow Channel- 650mmw
The Series/Parallel Centrifugal Pump Test Set allows the student to study the resultant fl...
Pitot Tube inclusive of Inlet tank, Outlet tank, Feed block and Manometer board
Pitot Static Tube uses the velocity principle, comprises a 20 mm bore acrylic tube with a...